Shop
Prices for goods per piece or meter in Euro incl. 19% VAT for customers in EU - no VAT for non EU customers!
Please contact us for orders and inquiries.
Asian customers please refer to our distributor RADIO PARTS JAPAN
US and Canadian customers please refer to our distributor VIBROPLEX
| Antennas | EU incl. 19% VAT | NON EU NO VAT |
| Kit 5-Band Folding Beam (20/17/15/12/10m)
This kit contains everything required to build the antenna. The center post, inner conductor and the 1" fiberglass joiner are completely machined. The feedpoint and cord support is molded onto the center post. The spreaders have molded swivel joint halves and tips. To finish the antenna the following things need to be done: Assembly time is approx. 6-8 hours. You need to do all this only once, of course! |
||
| Options / Accessories | ||
| transportation & protection bag with shoulder straps, black | EUR 20.00 | EUR 16.80 |
| 6m band kit | EUR 15.00 | EUR 12.60 |
| large clamp-on on ferrite core for common mode choke or general RFI reduction (Fair-Rite® # 0431177081) | EUR 15.00 | EUR 12.60 |
| guy ring for 30 mm mast tubing | EUR 5.00 | EUR 4.20 |
| N type socket connector instead of UHF (SO-239) socket connector | free | |
| recommended for permanent installation: | ||
| antenna: nylock nuts instead of wing nuts, and shorter bolts for locking swivel joints | free | |
| set of storm brackets incl. stainless steel bolts, nylock nuts and washers | EUR 20.00 | EUR 16.80 |
| recommended for temporary installation in high wind areas (hills, coast etc.): | ||
| set of storm brackets incl. stainless steel bolts, wing nuts and washers | EUR 20.00 | EUR 16.80 |
| Universal / spare parts | ||
| spreader segment (please specify inner / middle / outer) each | EUR 10.00 | EUR 8.40 |
| hub (without mounting hardware) | EUR 20.00 | EUR 16.80 |
| wire clip (to mount element wire to spreader) | EUR 1.00 | EUR 0.85 |
| universal detachable clamp for joining cords or wires up to 3,5 mm diameter | EUR 1.50 | EUR 1.25 |
| Top cap ventilated 30 mm (for center post) | EUR 1.50 | EUR 1.25 |
| Fiberglass rod 10" x 1" O.D. (center post - hub - mast joiner) machined | EUR 5.00 | EUR 4.20 |
| high strength and flexible tinned stranded copper wire 1.0 mm² (AWG 18), black PVC insulation | EUR 0.30 | EUR 0.25 |
| 1.5 mm Dyneema® support rope, UV resistant | EUR 0.25 | EUR 0.21 |
| 2,8 mm spacing cord, UV resistant (joins driver and reflector) | EUR 0.20 | EUR 0.17 |
| various hardware (bolts, nuts, washers, solder tags etc.) | please ask | |
| Shipping costs | ||
| small DHL parcel up to 2 kgs (4.4 lbs.), no insurance: | ||
| to Germany | EUR 5.00 | |
| to EU destination | EUR 10.00 | |
| all other destinations | EUR 16.00 | |
| regular DHL parcel up to 10 kgs (22 lbs.), EUR 500.00 insurance within EU: | ||
| to Germany | EUR 8.00 | |
| to EU destination | EUR 23.00 | |
| to non-EU destination in Europe (Switzerland etc.) | EUR 36.00 | |
| to north America, north Africa, near east (please ask if in doubt) | EUR 48.00 | |
| all other destinations | EUR 60.00 | |